NOSHOK 5530-MMAS-FP Soft Seat, Flange x Flange Angle 316 SS, Flare Pattern 5 Valve Manifold

Part Number: 5530-MMAS-FP
Online Prices

NOSHOK List price: Original price was: $1,593.50.Current price is: $999.99.

18 in stock

Call Us if you need anything Else-888-509-0111
Warranty: 3 YR
NEED TO PURCHASE IN BULK ?

5530-MMAS-FP 5 Valve Manifold, Soft Seat, Flange x Flange, Angle, 316 SS, Flare Pattern

NOSHOK 3070-MFS 1/2 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat valve

Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle

5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)

https://massmeasure.com/noshok/product/noshok-5530-mms-fp-5-valve-manifold-soft-seat-flange-x-flange-316-ss-flare-natural-gas-manifold-valves/

 

  • Designed for use with differential pressure transmitters incorporating two
    isolation valves, two equalizing valves and a vent valve in natural gas
    applications
  • Flare Pattern™ valve configuration provides maximum clearance for
    fingers during operation
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
    back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Non-rotating stem tip standard on large bore shut-off valves
  • Available in block, single flange, or double flange connection for remote or
    direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • Soft seat design has 6,000 psi pressure rating @ 200 °F
  • Features a replaceable Delrin® seat, and straight through porting for
    bidirectional, high capacity flow and easy roddable cleaning on the
    block valves
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems
  • Non-rotating stem tip standard on isolation valves
Dimensions  Print Catalog Page

Flare Pattern Logo

 

ORDERING INFORMATION

SERIES 5 5-valve
SEAT 5 Soft seat/tip 0.375″ orifice
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT standard or flange
VALVE TYPE MFC Flange-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel
FFC Female-Female, Steel MMC Flange-Flange, Steel MMAS* Flange-Flange 90° Angle, Stainless Steel
MFS Flange-Female, Stainless Steel MMAC* Flange-Flange 90° Angle, Steel MMS Flange-Flange, Stainless Steel

https://massmeasure.com/noshok/product/noshok-5030-5130-series-5-valve-hard-seat-natural-gas-manifold-valves/

* Only available in Flare Pattern™ configuration.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™
SOFT SEATS PK1 PEEK KF1 PCTFE
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL3 1″ Round knurled HL4 1-3/8″ Phenolic

 

* Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.

Description

5530-MMAS-FP 5 Valve Manifold, Soft Seat, Flange x Flange, Angle, 316 SS, Flare Pattern

NOSHOK 3070-MFS 1/2 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat valve

Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle

5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)

https://massmeasure.com/noshok/product/noshok-5530-mms-fp-5-valve-manifold-soft-seat-flange-x-flange-316-ss-flare-natural-gas-manifold-valves/

 

  • Designed for use with differential pressure transmitters incorporating two
    isolation valves, two equalizing valves and a vent valve in natural gas
    applications
  • Flare Pattern™ valve configuration provides maximum clearance for
    fingers during operation
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
    back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Non-rotating stem tip standard on large bore shut-off valves
  • Available in block, single flange, or double flange connection for remote or
    direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • Soft seat design has 6,000 psi pressure rating @ 200 °F
  • Features a replaceable Delrin® seat, and straight through porting for
    bidirectional, high capacity flow and easy roddable cleaning on the
    block valves
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems
  • Non-rotating stem tip standard on isolation valves
Dimensions  Print Catalog Page

Flare Pattern Logo

 

ORDERING INFORMATION

SERIES 5 5-valve
SEAT 5 Soft seat/tip 0.375″ orifice
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT standard or flange
VALVE TYPE MFC Flange-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel
FFC Female-Female, Steel MMC Flange-Flange, Steel MMAS* Flange-Flange 90° Angle, Stainless Steel
MFS Flange-Female, Stainless Steel MMAC* Flange-Flange 90° Angle, Steel MMS Flange-Flange, Stainless Steel

https://massmeasure.com/noshok/product/noshok-5030-5130-series-5-valve-hard-seat-natural-gas-manifold-valves/

* Only available in Flare Pattern™ configuration.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™
SOFT SEATS PK1 PEEK KF1 PCTFE
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL3 1″ Round knurled HL4 1-3/8″ Phenolic

 

* Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.