Back to products		
	
			
			
			
				
					 
				
				
		
	
				 
				
				
					
						Noshok DK1-SS One Piece Dielectric Gasket, Pair w/SS Bolts					
					
						$71.49 Original price was: $71.49.$53.61Current price is: $53.61.					
				
			Noshok SVS1 STAINLESS STEEL Stabilized connector pair with integral valve
	
			
		
			
				Part Number:			
			
				SVS1			
		
	
	
	
	
				$609.23 Original price was: $609.23.$456.20Current price is: $456.20.
- Block valve can be installed on either side of stabilized body, allowing 1/2 turn installation
- Slotted bolt holes allow for 2-1/8″ and 2-1/4″ bolt spacings
- Designed to reinforce the entire installation by shifting radial-stress load away from the NPT connections
- 0.375″ bore for unrestricted passage of process gas
- Non-rotating stem tip standard on block valves
- Blow-out proof stem provides a secondary stem seal in the full open position
- Features a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
- Metal body-to-bonnet and body-to-flange plug with secondary o-ring seals
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- Includes PTFE gaskets and carbon steel bolts for manifold installation
- Optional dielectric barrier creates a non-conductive shield between the instrument and the orifice fittin
Description
- Block valve can be installed on either side of stabilized body, allowing 1/2 turn installation
- Slotted bolt holes allow for 2-1/8″ and 2-1/4″ bolt spacings
- Designed to reinforce the entire installation by shifting radial-stress load away from the NPT connections
- 0.375″ bore for unrestricted passage of process gas
- Non-rotating stem tip standard on block valves
- Blow-out proof stem provides a secondary stem seal in the full open position
- Features a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
- Metal body-to-bonnet and body-to-flange plug with secondary o-ring seals
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- Includes PTFE gaskets and carbon steel bolts for manifold installation
- Optional dielectric barrier creates a non-conductive shield between the instrument and the orifice fittin
 
	 
	
 
															
							 
				
 
		 
		