NOSHOK PT40-5000psig-1-5-8-17-CC High Accuracy Fixed Range Pressure Transmitter, 0 to 5000 psi gauge, ?0.25% of span, non-linearity best fit straight line per IEC 61298-2 at reference conditions, 0 Vdc to 10 Vdc, 3-wire, 1/2 NPT male, DIN form C with 3 ft cable, Certified Calibration
NOSHOK List price: Original price was: $615.37.$492.00Current price is: $492.00.
NOSHOK PT20-100psia-1-1-2-8-ST8 General Purpose Fixed Range Pressure Transmitter, 0 to 100 psi absolute,0.5% of span, 4 mA to 20 mA, 2-wire, 1/4 NPT male, DIN form A, integral orifice
NOSHOK List price: Original price was: $255.48.$199.99Current price is: $199.99.
Noshok 300/400/600/700/900 Series Vapor Actuated Remote Dial Indicating Thermometers
Online Prices
NOSHOK List price: $150.00
Noshok 300/400/600/700/900 Series Vapor Actuated Remote Dial Indicating Thermometers
300/400/600/700/900 Series Vapor Actuated Remote Dial Indicating Thermometers
- Indicates media temperature using a temperature-actuated liquid in the sensing element and a highly accurate, high quality pressure gauge
- As the media temperature increases, the capillary fill fluid vaporizes, increasing pressure in the Bourdon tube to activate the movement and pointer for proper indication
- Ranges available from -40 °F/C to 60 °F/C through 100 °F/C to 350 °F/C
- 2-1/2″, 4″, 4-1/2″ and 6″ sizes
- Brass, stainless steel, or phenolic case
- Dry or liquid filled
- Bottom, back or lower back connected
- Mounting options: front or rear flange, bezel, and u-clamp
- Capillary material: copper or stainless steel
- Bulb material & dimensions: copper or stainless steel, 2-5/8″ x 3/8″ through 7-5/8″ x 3/8″
- The dial scale graduations are non-linear, therefore the highest degree of accuracy and readability is found in the upper half of the scale
Note: Thermowells are recommended for pressure, corrosive fluids and high velocity
applications.
ORDERING INFORMATION
| 300 SERIES | 25-300 | 2-1/2″, brass case, bottom connection | 25-310 | 2-1/2″, brass case, back connection |
| 400 SERIES | 40-400 | 4″, all stainless, bottom connection | 40-410 | 4″, all stainless, back connection |
| 60-400 | 6″, all stainless, bottom connection | 60-410 | 6″, all stainless, back connection | |
| 600 SERIES | 45-640 | 4-1/2″, phenolic case/brass bottom connection | ||
| 700 SERIES | 45-740 | 4-1/2″, phenolic case/stainless bottom connection | ||
| 900 SERIES | 40-901 | 4″, stainless case, brass bottom connection | 40-911 | 4″, stainless case, brass back connection |
| GAUGE FILL FLUIDS | 0 | Dry gauge | 2 | -40° service |
| 1 | Glycerine | 3 | Silicone | |
| MOUNTING OPTIONS | 0 | None | 3 | Rear flange2 |
| 1 | Chrome front flange1 | 4 | Bezel & u-clamp3 | |
| 2 | Brass front flange1 | 5 | Stainless steel front flange4 | |
| TEMPERATURE RANGES | 1 | -40 °F/°C to 60 °F/°C | 6 | 30 °F/°C to 180 °F/°C |
| 2 | -20 °F/°C to 120 °F/°C | 7 | 30 °F/°C to 240 °F/°C | |
| 3 | 0 °F/°C to 250 °F/°C | 8 | 30 °F/°C to 300 °F/°C | |
| 4 | 0 °F/°C to 300 °F/°C | 9 | 50 °F/°C to 350 °F/°C | |
| 5 | 20 °F/°C to 220 °F/°C | 10 | 100 °F/°C to 350 °F/°C | |
| CAPILLARY TYPES/MATERIALS | 1 | Plain copper | 3 | Plain stainless steel |
| 2 | Armored copper | 4 | Armored stainless steel | |
| CAPILLARY LENGTH | ## | Specify in feet | ||
| BULB STYLES/MATERIALS | 1 | Plain copper | 3 | 1/2″ NPT union copper |
| 2 | Plain stainless steel | 4 | 1/2 NPT union stainless steel | |
| BULB DIMENSIONS | 1 | 2-5/8″ x 3/8″* | 6 | 4″ x 3/8″ |
| 2 | 4-1/2″ x 3/8″ | 7 | 9″ x 3/8″ | |
| 3 | 8″ x 3/8″ | 8 | 7-5/8″ x 3/8″ | |
| 4 | 3-1/2″ x 3/8″ | 15 | 6″ x 1/2″ 5 | |
| 5 | 6″ x 3/8″ |
1 Only available on 300 Series
2 Not available on 600/700 Series
3 Only available on back connection case types
4 Only available on 400, 600 & 900 Series
5 4″ gauge or larger requires 6″ bulb
Description
Noshok 300/400/600/700/900 Series Vapor Actuated Remote Dial Indicating Thermometers
300/400/600/700/900 Series Vapor Actuated Remote Dial Indicating Thermometers
- Indicates media temperature using a temperature-actuated liquid in the sensing element and a highly accurate, high quality pressure gauge
- As the media temperature increases, the capillary fill fluid vaporizes, increasing pressure in the Bourdon tube to activate the movement and pointer for proper indication
- Ranges available from -40 °F/C to 60 °F/C through 100 °F/C to 350 °F/C
- 2-1/2″, 4″, 4-1/2″ and 6″ sizes
- Brass, stainless steel, or phenolic case
- Dry or liquid filled
- Bottom, back or lower back connected
- Mounting options: front or rear flange, bezel, and u-clamp
- Capillary material: copper or stainless steel
- Bulb material & dimensions: copper or stainless steel, 2-5/8″ x 3/8″ through 7-5/8″ x 3/8″
- The dial scale graduations are non-linear, therefore the highest degree of accuracy and readability is found in the upper half of the scale
Note: Thermowells are recommended for pressure, corrosive fluids and high velocity
applications.
ORDERING INFORMATION
| 300 SERIES | 25-300 | 2-1/2″, brass case, bottom connection | 25-310 | 2-1/2″, brass case, back connection |
| 400 SERIES | 40-400 | 4″, all stainless, bottom connection | 40-410 | 4″, all stainless, back connection |
| 60-400 | 6″, all stainless, bottom connection | 60-410 | 6″, all stainless, back connection | |
| 600 SERIES | 45-640 | 4-1/2″, phenolic case/brass bottom connection | ||
| 700 SERIES | 45-740 | 4-1/2″, phenolic case/stainless bottom connection | ||
| 900 SERIES | 40-901 | 4″, stainless case, brass bottom connection | 40-911 | 4″, stainless case, brass back connection |
| GAUGE FILL FLUIDS | 0 | Dry gauge | 2 | -40° service |
| 1 | Glycerine | 3 | Silicone | |
| MOUNTING OPTIONS | 0 | None | 3 | Rear flange2 |
| 1 | Chrome front flange1 | 4 | Bezel & u-clamp3 | |
| 2 | Brass front flange1 | 5 | Stainless steel front flange4 | |
| TEMPERATURE RANGES | 1 | -40 °F/°C to 60 °F/°C | 6 | 30 °F/°C to 180 °F/°C |
| 2 | -20 °F/°C to 120 °F/°C | 7 | 30 °F/°C to 240 °F/°C | |
| 3 | 0 °F/°C to 250 °F/°C | 8 | 30 °F/°C to 300 °F/°C | |
| 4 | 0 °F/°C to 300 °F/°C | 9 | 50 °F/°C to 350 °F/°C | |
| 5 | 20 °F/°C to 220 °F/°C | 10 | 100 °F/°C to 350 °F/°C | |
| CAPILLARY TYPES/MATERIALS | 1 | Plain copper | 3 | Plain stainless steel |
| 2 | Armored copper | 4 | Armored stainless steel | |
| CAPILLARY LENGTH | ## | Specify in feet | ||
| BULB STYLES/MATERIALS | 1 | Plain copper | 3 | 1/2″ NPT union copper |
| 2 | Plain stainless steel | 4 | 1/2 NPT union stainless steel | |
| BULB DIMENSIONS | 1 | 2-5/8″ x 3/8″* | 6 | 4″ x 3/8″ |
| 2 | 4-1/2″ x 3/8″ | 7 | 9″ x 3/8″ | |
| 3 | 8″ x 3/8″ | 8 | 7-5/8″ x 3/8″ | |
| 4 | 3-1/2″ x 3/8″ | 15 | 6″ x 1/2″ 5 | |
| 5 | 6″ x 3/8″ |
1 Only available on 300 Series
2 Not available on 600/700 Series
3 Only available on back connection case types
4 Only available on 400, 600 & 900 Series
5 4″ gauge or larger requires 6″ bulb
