-20%
8 in stock
Noshok 25-510-30/100-psi/kPa-SG-ST8 1/4 NPT Back Conn, 2.5 Stainless Steel Gauge, Glycerin Filled, Safety Glass Lens, 0.8 mm SS Threaded Orifice
Original price was: $224.72.$129.52Current price is: $129.52.
NOSHOK 612-15-1-1-N-60 4-20 mA, Submersible Transmitters, 60 ft PUR Cable
Original price was: $1,346.52.$1,077.52Current price is: $1,077.52.
NOSHOK 2170-FFS 2 Valve Block & Bleed, Soft Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
- The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
Original price was: $374.52.$301.25Current price is: $301.25.
NOSHOK 2170-FFS 2 Valve Block & Bleed, Soft Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
series 2-Valve Block & Bleed, Soft Seat Needle Valves
- 2 Valve Block & Bleed, Soft Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
Download Literature
Water/
Wastewater
Wastewater
Oil & Gas
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEAT | 1 | Soft seat | ||||
| PROCESS TYPE | 7 | Block & bleed | ||||
| CONNECTION SIZES | 0 | 1/2″ NPT | 2 | 1/4″ NPT | ||
| VALVE TYPES | MFC | Male-Female, Steel | FMC | Female-Male, Steel | FFCR | Female-Female, Steel, Right Vent |
| MFCR | Male-Female, Steel, Right Vent | EFMC | Extended Female-Male, Steel | EFFC | Extended Female-Female, Steel | |
| EMFC | Extended Male-Female, Steel | FMS | Female-Male, Stainless Steel | FFS | Female-Female, Stainless Steel | |
| MFS | Male-Female, Stainless Steel | EFMS | Extended Female-Male, Stainless Steel | FFSR | Female-Female, Stainless Steel, Right Vent | |
| MFSR | Male-Female, Stainless Steel, Right Vent | FFC | Female-Female, Steel | EFFS | Extended Female-Female, Stainless Steel | |
| EMFS | Extended Male-Female, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these
options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2170-FFC-PK1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
| SOFT SEAT | PK1 | PEEK | KF1 | PCTFE | ||
| PACKING | P1 | PTFE | ||||
| STEM TIP | T1 | Non-rotating (316 stainless, Isolation Valve Only) | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
| HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | |||
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
Description
NOSHOK 2170-FFS 2 Valve Block & Bleed, Soft Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
series 2-Valve Block & Bleed, Soft Seat Needle Valves
- 2 Valve Block & Bleed, Soft Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
Download Literature
Water/
Wastewater
Wastewater
Oil & Gas
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEAT | 1 | Soft seat | ||||
| PROCESS TYPE | 7 | Block & bleed | ||||
| CONNECTION SIZES | 0 | 1/2″ NPT | 2 | 1/4″ NPT | ||
| VALVE TYPES | MFC | Male-Female, Steel | FMC | Female-Male, Steel | FFCR | Female-Female, Steel, Right Vent |
| MFCR | Male-Female, Steel, Right Vent | EFMC | Extended Female-Male, Steel | EFFC | Extended Female-Female, Steel | |
| EMFC | Extended Male-Female, Steel | FMS | Female-Male, Stainless Steel | FFS | Female-Female, Stainless Steel | |
| MFS | Male-Female, Stainless Steel | EFMS | Extended Female-Male, Stainless Steel | FFSR | Female-Female, Stainless Steel, Right Vent | |
| MFSR | Male-Female, Stainless Steel, Right Vent | FFC | Female-Female, Steel | EFFS | Extended Female-Female, Stainless Steel | |
| EMFS | Extended Male-Female, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these
options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2170-FFC-PK1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
| SOFT SEAT | PK1 | PEEK | KF1 | PCTFE | ||
| PACKING | P1 | PTFE | ||||
| STEM TIP | T1 | Non-rotating (316 stainless, Isolation Valve Only) | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
| HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | |||
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
