-25%
35 in stock
NOSHOK-102-MFS 1/4 NPT, Male x Female, 316 SS, Hard Seat Mini Valve
NOSHOK List price: Original price was: $108.93.$52.50Current price is: $52.50.
NOSHOK-PT20-300psic-1-5-2-7 General Purpose Fixed Range Pressure Transmitter, -15 to 300 psi gauge, 0.5% of span,, 0 Vdc to 10 Vdc, 3-wire, 1/4 NPT male, DIN form C
NOSHOK List price: Original price was: $216.00.$172.20Current price is: $172.20.
NOSHOK-2170-FFS-P1 2 Valve Block & Bleed, Soft Seat, ptfe Packing 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
Online Prices
NOSHOK List price: Original price was: $411.39.$310.20Current price is: $310.20.
NOSHOK 2170-FFS-P1 2 Valve Block & Bleed, Soft Seat, ptfe Packing 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
- The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
| EFFC | Extended Female-Female, Steel | |||||
| FFS | Female-Female, Stainless Steel | |||||
| FFSR | Female-Female, Stainless Steel, Right Vent | |||||
| EFFS | Extended Female-Female, Stainless Steel | |||||
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these
options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2170-FFC-PK1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
| SOFT SEAT | PK1 | PEEK | KF1 | PCTFE | ||
| PACKING | P1 | PTFE | ||||
| STEM TIP | T1 | Non-rotating (316 stainless, Isolation Valve Only) | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
| HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | |||
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2170-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
Description
NOSHOK 2170-FFS-P1 2 Valve Block & Bleed, Soft Seat, ptfe Packing 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
- The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6,000 psi pressure rating @ 200 °F
- Replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- PCTFE or PEEK soft seat optional
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
| EFFC | Extended Female-Female, Steel | |||||
| FFS | Female-Female, Stainless Steel | |||||
| FFSR | Female-Female, Stainless Steel, Right Vent | |||||
| EFFS | Extended Female-Female, Stainless Steel | |||||
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these
options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2170-FFC-PK1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
| SOFT SEAT | PK1 | PEEK | KF1 | PCTFE | ||
| PACKING | P1 | PTFE | ||||
| STEM TIP | T1 | Non-rotating (316 stainless, Isolation Valve Only) | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
| HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | |||
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2170-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
