-45%
NOSHOK 40-412-20000-psi 1/2 NPT Back Conn 4 dry Stainless Steel Extreme High Pressure Gauge-20000 psi
NOSHOK List price: $806.90 Original price was: $806.90.$565.00Current price is: $565.00.
NOSHOK 25-500-60-psi-SG-RCP 1/4 NPT Bottom Conn 2.5 Stainless Steel Gauge, Glycerin Fill, Safety Glass Lens RUBBER CASE PROTECTOR
NOSHOK List price: $206.92 Original price was: $206.92.$131.20Current price is: $131.20.
NOSHOK 102-MMAS Hard Seat, 1/4 NPT Male – 1/4 NPT Male Angle, 316 SS, 0.172″ Orifice Mini Valve
Part Number:
102-MMAS
Online Prices
NOSHOK List price: $136.18 Original price was: $136.18.$74.50Current price is: $74.50.
SERIES | 1 | 100 Series, hard seat | ||||
CONNECTION SIZES | 01 | 1/8″ NPT | 42 | 7/16″-20 UNF-2B* | ||
02 | 1/4″ NPT | 43 | 9/16″-18 UNF-2B* | |||
VALVE TYPES | MMB | Male-Male, Brass | EMFC | Extended Male-Female, Steel | EMFS | Extended Male-Female, Stainless Steel |
MFB | Male-Female, Brass | MFC | Male-Female, Steel | MFS | Male-Female, Stainless Steel | |
EFFB | Extended Female-Female, Brass | EFFC | Extended Female-Female, Steel | EFFS | Extended Female-Female, Stainless Steel | |
FFB | Female-Female, Brass | FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | |
MMAB | Male-Male Angle, Brass | MMAC | Male-Male Angle, Steel | MMAS | Male-Male Angle, Stainless Steel | |
MFAB | Male-Female Angle, Brass | MFAC | Male-Female Angle, Steel | MFAS | Male-Female Angle, Stainless Steel | |
FFAB | Female-Female Angle, Brass | FFAC | Female-Female Angle, Steel | FFAS | Female-Female Angle, Stainless Steel | |
MMC | Male-Male, Steel | MMS | Male-Male, Stainless Steel |
* Available only on EFFB, EFFC, and EFFS valve types.
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 102-MFC-HL3)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
PACKINGS * | P1 | PTFE | P2 | Graphite | ||
STEM TIPS | T1 | Non-rotating (316 stainless standard) | T6 | Ball (carbide) | T8 | Ball (Monel) |
T5 | Ball (440C stainless) | T7 | Ball (ceramic) | T9 | Non-rotating regulating (316 Stainless) | |
O-RINGS ** | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
PANEL MOUNTINGS | PM1 | Panel mount (1 nut) | PM2 | Panel mount (2 nuts) | ||
HANDLES | HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | ||
HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
* If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
** Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled (HL3) handles, steel mini “T” handles (HL1), and 316SS mini “T” handles (HL1).
The handle material will always match the material of the valve, unless otherwise specified. For example, the round knurled (HL3) on a 102-FFB will be brass. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
Description
SERIES | 1 | 100 Series, hard seat | ||||
CONNECTION SIZES | 01 | 1/8″ NPT | 42 | 7/16″-20 UNF-2B* | ||
02 | 1/4″ NPT | 43 | 9/16″-18 UNF-2B* | |||
VALVE TYPES | MMB | Male-Male, Brass | EMFC | Extended Male-Female, Steel | EMFS | Extended Male-Female, Stainless Steel |
MFB | Male-Female, Brass | MFC | Male-Female, Steel | MFS | Male-Female, Stainless Steel | |
EFFB | Extended Female-Female, Brass | EFFC | Extended Female-Female, Steel | EFFS | Extended Female-Female, Stainless Steel | |
FFB | Female-Female, Brass | FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | |
MMAB | Male-Male Angle, Brass | MMAC | Male-Male Angle, Steel | MMAS | Male-Male Angle, Stainless Steel | |
MFAB | Male-Female Angle, Brass | MFAC | Male-Female Angle, Steel | MFAS | Male-Female Angle, Stainless Steel | |
FFAB | Female-Female Angle, Brass | FFAC | Female-Female Angle, Steel | FFAS | Female-Female Angle, Stainless Steel | |
MMC | Male-Male, Steel | MMS | Male-Male, Stainless Steel |
* Available only on EFFB, EFFC, and EFFS valve types.
To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 102-MFC-HL3)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
ORDERING INFORMATION – Additional Options
PACKINGS * | P1 | PTFE | P2 | Graphite | ||
STEM TIPS | T1 | Non-rotating (316 stainless standard) | T6 | Ball (carbide) | T8 | Ball (Monel) |
T5 | Ball (440C stainless) | T7 | Ball (ceramic) | T9 | Non-rotating regulating (316 Stainless) | |
O-RINGS ** | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
PANEL MOUNTINGS | PM1 | Panel mount (1 nut) | PM2 | Panel mount (2 nuts) | ||
HANDLES | HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | ||
HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
* If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
** Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled (HL3) handles, steel mini “T” handles (HL1), and 316SS mini “T” handles (HL1).
The handle material will always match the material of the valve, unless otherwise specified. For example, the round knurled (HL3) on a 102-FFB will be brass. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.