NOSHOK 408-MFS 1 NPT, Male x Female, 316 SS, Hard Seat Needle Valve NOSHOK List price: Original price was: $800.14.Current price is: $450.00.
Back to products
Block & Bleed Hard Seat Needle VALVES-NOSHOK 600 Series NOSHOK List price: Original price was: $281.63.Current price is: $52.00.

NOSHOK 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle

Part Number: 502-MFC
Online Prices

NOSHOK List price: Original price was: $81.90.Current price is: $39.99.

Available on backorder

DUE IN jULY
Warranty: 3 YR
NEED TO PURCHASE IN BULK ?

Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle

Soft Seat Needle Valves-NOSHOK 500 series-Pick Your Sizes Below

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 5 500 Series, soft seat
CONNECTION SIZES 02 1/4″ NPT 04 1/2″ NPT 08 1″ NPT 12 1-1/2″ NPT
03 3/8″ NPT 06 3/4″ NPT 10 1-1/4″ NPT 0402 1/2″ NPT male – 1/4″ NPT female
VALVE TYPES MFC Male-Female, Steel MFS Male-Female, Stainless Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 504-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

SOFT SEATS PK1 PEEK KF1 PCTFE
PACKINGS P1 PTFE
STEM TIPS T1 Non-rotating (316 stainless)
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR
PANEL MOUNTINGS PM1 Panel mount (1 nut) PM2 Panel mount (2 nuts)
HANDLES HL4 1-3/8″ Phenolic HL5 1-3/4″ Phenolic HL9 2-3/8″ Phenolic**

† For 1/4″, 3/8″ and 1/2″ NPT only.
* Other o-ring materials available on request.
** For 3/4″ NPT to 1-1/2″ NPT only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are “T” handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 504-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

Description

Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle

Soft Seat Needle Valves-NOSHOK 500 series-Pick Your Sizes Below

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 5 500 Series, soft seat
CONNECTION SIZES 02 1/4″ NPT 04 1/2″ NPT 08 1″ NPT 12 1-1/2″ NPT
03 3/8″ NPT 06 3/4″ NPT 10 1-1/4″ NPT 0402 1/2″ NPT male – 1/4″ NPT female
VALVE TYPES MFC Male-Female, Steel MFS Male-Female, Stainless Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 504-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

SOFT SEATS PK1 PEEK KF1 PCTFE
PACKINGS P1 PTFE
STEM TIPS T1 Non-rotating (316 stainless)
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR
PANEL MOUNTINGS PM1 Panel mount (1 nut) PM2 Panel mount (2 nuts)
HANDLES HL4 1-3/8″ Phenolic HL5 1-3/4″ Phenolic HL9 2-3/8″ Phenolic**

† For 1/4″, 3/8″ and 1/2″ NPT only.
* Other o-ring materials available on request.
** For 3/4″ NPT to 1-1/2″ NPT only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are “T” handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 504-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.