NOSHOK-40-911-10000-psi/kPa 1/4 NPT Back Conn, 4 inch Stainless Steel Case Pressure Gauge, Glycerin Filled-10,000 PSI NOSHOK List price: Original price was: $182.60.Current price is: $95.00.
Back to products
NOSHOK-20-148-100-psi/kPa-SP 1/8 NPT/10-32 Female Conn, 2 ABS dry Square Case Gauge, Red Set Pointer NOSHOK List price: Original price was: $53.50.Current price is: $37.50.

NOSHOK-2070-MFS 1/2 NPT, Male x Female, 316 SS, 2-Valve Block & Bleed, Hard Seat

Part Number: 2070-MFS
Online Prices

NOSHOK List price: Original price was: $385.05.Current price is: $268.50.

148 in stock

Avalable For immediate Delivery
Warranty: 3 YR
NEED TO PURCHASE IN BULK ?

NOSHOK 2070-MFS 1/2 NPT, Male x Female, 316 SS, 2-Valve Block & Bleed, Hard Seat

2070 Series 2-Valve Block & Bleed, Hard Seat Needle Valves

3 Year Warranty

  • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
  • The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 10,000 psi hard seat pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Dimensions Options Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve
SEAT 0 Hard seat
PROCESS TYPE 7 Block & bleed
CONNECTION SIZES 0 1/2″ NPT 2 1/4″ NPT 0604 3/4″ NPT male – 1/2″ NPT male or female
VALVE TYPES MFC Male-Female, Steel FMC Female-Male, Steel FFCR Female-Female, Steel, Right Vent
MFCR Male-Female, Steel, Right Vent EFMC Extended Female-Male, Steel EFFC Extended Female-Female, Steel
EMFC Extended Male-Female, Steel FMS Female-Male, Stainless Steel FFS Female-Female, Stainless Steel
MFS Male-Female, Stainless Steel EFMS Extended Female-Male, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent
MFSR Male-Female, Stainless Steel, Right Vent FFC Female-Female, Steel EFFS Extended Female-Female, Stainless Steel
EMFS Extended Male-Female, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2070-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

PACKINGS P1 PTFE P2 Graphite
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide) T8 Ball (Monel)
T5 Ball (440C stainless) T7 Ball (ceramic) T9 Non-rotating regulating (316 Stainless)
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL3 1″ Round knurled HL5 1-3/4″ Phenolic
HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.

*   Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed mini “T” handles (HL1).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.


Fo

Description

NOSHOK 2070-MFS 1/2 NPT, Male x Female, 316 SS, 2-Valve Block & Bleed, Hard Seat

2070 Series 2-Valve Block & Bleed, Hard Seat Needle Valves

3 Year Warranty

  • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation
  • The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 10,000 psi hard seat pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Dimensions Options Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve
SEAT 0 Hard seat
PROCESS TYPE 7 Block & bleed
CONNECTION SIZES 0 1/2″ NPT 2 1/4″ NPT 0604 3/4″ NPT male – 1/2″ NPT male or female
VALVE TYPES MFC Male-Female, Steel FMC Female-Male, Steel FFCR Female-Female, Steel, Right Vent
MFCR Male-Female, Steel, Right Vent EFMC Extended Female-Male, Steel EFFC Extended Female-Female, Steel
EMFC Extended Male-Female, Steel FMS Female-Male, Stainless Steel FFS Female-Female, Stainless Steel
MFS Male-Female, Stainless Steel EFMS Extended Female-Male, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent
MFSR Male-Female, Stainless Steel, Right Vent FFC Female-Female, Steel EFFS Extended Female-Female, Stainless Steel
EMFS Extended Male-Female, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2070-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

PACKINGS P1 PTFE P2 Graphite
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide) T8 Ball (Monel)
T5 Ball (440C stainless) T7 Ball (ceramic) T9 Non-rotating regulating (316 Stainless)
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL3 1″ Round knurled HL5 1-3/4″ Phenolic
HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.

*   Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed mini “T” handles (HL1).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.


Fo