NOSHOK 12-6-PIN-WP-BENDIX-MATING Mating Connector Water Proof NOSHOK List price: Original price was: $105.30.Current price is: $79.60.
Back to products
Noshok 2703-FFS 3/8" NPT Female - 3/8" NPT Female 2-Valve Block & Bleed Manifold Valve NOSHOK List price: Original price was: $295.38.Current price is: $222.25.

Noshok 2703-FFC 3/8″ NPT Female – 3/8″ NPT Female-Steel 2-Valve Block & Bleed Manifold Valve

Part Number: 2703-FFC
Online Prices

NOSHOK List price: Original price was: $197.67.Current price is: $148.50.

Warranty: 3 YR

2603/2703 & 2604/2704 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Tip (0.156″ Orifice)

 

  • Combines isolating and venting in a single valve, eliminating the need
    for tubing and fittings
  • Block valve isolates the downstream process fluids and the bleed valve
    exhausts upstream fluids enabling static pressure transmitters, switches
    or gauges to be removed without disturbing the permanent piping installation
  • Block valve is located on the right and the bleed valve is located on top in
    a 90° orientation, venting is to the left
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem,
    and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • 2603/2604 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 2703/2704 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect
    from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
    increase the pressure range of the valve (U.S. Patent 7,758,014)
Dimensions  Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve        
SEATS 6 Hard seat 7 Soft tip    
PROCESS TYPE 0 Static pressure        
CONNECTIONS 3 3/8″ NPT 4 1/2″ NPT    
VALVE TYPES FFC Female-Female, Steel FFCR Female-Female, Steel, Right Vent    
FFS Female-Female, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2704-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM.

ORDERING INFORMATION – Additional Options

PACKINGS P1 PTFE P2 Grafoil®**        
STEM TIPS T1 Non-rotating (316 stainless) T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Delrin®***
T2 Delrin® (Acetal)*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PCTFE***
T3 PCTFE*** T6 Ball (carbide)** T9 Regulating hard** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR    
HANDLES HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic        
  HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

*   Other o-ring materials available on request.
**  Hard seat only.
*** Soft tip only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handle (HL2) and bleed 1-3/8″ mini “T” handle (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL1) on the 2704-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2015 NOSHOK. ALL RIGHTS RESERVED.

Description

2603/2703 & 2604/2704 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Tip (0.156″ Orifice)

 

  • Combines isolating and venting in a single valve, eliminating the need
    for tubing and fittings
  • Block valve isolates the downstream process fluids and the bleed valve
    exhausts upstream fluids enabling static pressure transmitters, switches
    or gauges to be removed without disturbing the permanent piping installation
  • Block valve is located on the right and the bleed valve is located on top in
    a 90° orientation, venting is to the left
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem,
    and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • 2603/2604 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 2703/2704 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect
    from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the
    bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
    increase the pressure range of the valve (U.S. Patent 7,758,014)
Dimensions  Print Catalog Page

 

ORDERING INFORMATION

SERIES 2 2-valve        
SEATS 6 Hard seat 7 Soft tip    
PROCESS TYPE 0 Static pressure        
CONNECTIONS 3 3/8″ NPT 4 1/2″ NPT    
VALVE TYPES FFC Female-Female, Steel FFCR Female-Female, Steel, Right Vent    
FFS Female-Female, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent    

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2704-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM.

ORDERING INFORMATION – Additional Options

PACKINGS P1 PTFE P2 Grafoil®**        
STEM TIPS T1 Non-rotating (316 stainless) T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Delrin®***
T2 Delrin® (Acetal)*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PCTFE***
T3 PCTFE*** T6 Ball (carbide)** T9 Regulating hard** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR    
HANDLES HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic        
  HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

*   Other o-ring materials available on request.
**  Hard seat only.
*** Soft tip only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handle (HL2) and bleed 1-3/8″ mini “T” handle (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL1) on the 2704-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2015 NOSHOK. ALL RIGHTS RESERVED.