Noshok 102-MFS-PM1 1/4 NPT, Male x Female, 316 SS, 1 nut Panel Mount, Hard Seat Mini Valve

1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Mini Valve

• Mini Valve, Hard Seat, 1/4 NPT Male – 1/4 NPT Female, 316 SS, 0.172″ Orifice, Panel Mount (1 nut)

• a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

  ORDERING INFORMATION

  SERIES	1	100 Series, hard seat
  CONNECTION SIZES	01	1/8″ NPT	42	7/16″-20 UNF-2B*
  	02	1/4″ NPT	43	9/16″-18 UNF-2B*
  VALVE TYPES	MMB	Male-Male, Brass	EMFC	Extended Male-Female, Steel	EMFS	Extended Male-Female, Stainless Steel
  	MFB	Male-Female, Brass	MFC	Male-Female, Steel	MFS	Male-Female, Stainless Steel
  	EFFB	Extended Female-Female, Brass	EFFC	Extended Female-Female, Steel	EFFS	Extended Female-Female, Stainless Steel
  	FFB	Female-Female, Brass	FFC	Female-Female, Steel	FFS	Female-Female, Stainless Steel
  	MMAB	Male-Male Angle, Brass	MMAC	Male-Male Angle, Steel	MMAS	Male-Male Angle, Stainless Steel
  	MFAB	Male-Female Angle, Brass	MFAC	Male-Female Angle, Steel	MFAS	Male-Female Angle, Stainless Steel
  	FFAB	Female-Female Angle, Brass	FFAC	Female-Female Angle, Steel	FFAS	Female-Female Angle, Stainless Steel
  	MMC	Male-Male, Steel	MMS	Male-Male, Stainless Steel

  * Available only on EFFB, EFFC, and EFFS valve types.

  To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
  NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 102-MFC-HL3)
  NOTE 2: When a packing option is selected, an o-ring option is NOT available.

  ORDERING INFORMATION – Additional Options

  PACKINGS *	P1	PTFE	P2	Graphite
  STEM TIPS	T1	Non-rotating (316 stainless standard)	T6	Ball (carbide)	T8	Ball (Monel)
  	T5	Ball (440C stainless)	T7	Ball (ceramic)	T9	Non-rotating regulating (316 Stainless)
  O-RINGS **	EM1	EPDM	KZ1	FFKM (Perfluoroelastomer)	NB1	NBR
  PANEL MOUNTINGS	PM1	Panel mount (1 nut)	PM2	Panel mount (2 nuts)
  HANDLES	HL2	2-1/2″ “T”	HL4	1-3/8″ Phenolic
  	HL3	1″ Round knurled	HL5	1-3/4″ Phenolic

  * If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
  ** Other o-ring materials available on request.

  Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled (HL3) handles, steel mini “T” handles (HL1), and 316SS mini “T” handles (HL1).

  The handle material will always match the material of the valve, unless otherwise specified. For example, the round knurled (HL3) on a 102-FFB will be brass. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.