-45%
Noshok 25-911-6000-psi/kPa 1/4 NPT Back Conn 2.5 SS Case Pressure Filled Gauge-6000 psi-kpa
Original price was: $90.96.$32.59Current price is: $32.59.
Noshok 25-300-200-psi 1/4 NPT Bottom Conn 2.5 Brass Case Gauge, Glycerin Filled-200 psi
Original price was: $127.85.$79.99Current price is: $79.99.
Noshok 2000 Series hard seat 2-Valve Block & Bleed Manifold Valves
Original price was: $553.20.$306.25Current price is: $306.25.
Noshok 2000/ 2-Valve Block & Bleed Manifold Valves Hard Seat & Soft Seat
2000/2100 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Seat
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping
installation - Block valve is located on the left side and the bleed valve is located on top in a 90° orientation, venting is to the right
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 2000 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
- 2100 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
- 2100 Series valve also features a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
- All stems are 316 stainless steel
- Stem and bonnet threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below
the bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems (non-packing)
- Zinc-nickel plated high tensile strength 4140 steel mounting bolts included for flanged connections
f you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEATS | 0 | Hard seat | 1 | Soft seat | ||
| PROCESS TYPE | 0 | Static pressure | ||||
| CONNECTIONS | 0 | 1/2″ NPT standard or flange | 2 | 1/4″ NPT | ||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female,Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2100-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: T1 Hard non-rotating (316 SS standard) stem tip is the only option available on the 2100 Series soft seat version.
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||
| PACKINGS† | P1 | PTFE | P2 | Graphite | ||
| STEM TIPS | T1 | Non-rotating (316 stainless) | T6 | Ball (carbide)** | T8 | Ball (Monel)** |
| T5 | Ball (440C stainless) ** | T7 | Ball (ceramic)** | T9 | Non-rotating regulating (316 Stainless)** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.*Other o-ring materials available on request.
* Other o-ring materials available on request.
** For 2000 Series only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2100-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
Description
Noshok 2000/ 2-Valve Block & Bleed Manifold Valves Hard Seat & Soft Seat
2000/2100 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Seat
- Combines isolating and venting in a single valve, eliminating the need for tubing and fittings
- Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, switches or gauges to be removed without disturbing the permanent piping
installation - Block valve is located on the left side and the bleed valve is located on top in a 90° orientation, venting is to the right
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 2000 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
- 2100 Series soft seat valves have 6,000 psi pressure rating @ 200 °F
- 2100 Series valve also features a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
- All stems are 316 stainless steel
- Stem and bonnet threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below
the bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems (non-packing)
- Zinc-nickel plated high tensile strength 4140 steel mounting bolts included for flanged connections
f you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEATS | 0 | Hard seat | 1 | Soft seat | ||
| PROCESS TYPE | 0 | Static pressure | ||||
| CONNECTIONS | 0 | 1/2″ NPT standard or flange | 2 | 1/4″ NPT | ||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female,Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2100-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: T1 Hard non-rotating (316 SS standard) stem tip is the only option available on the 2100 Series soft seat version.
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||
| PACKINGS† | P1 | PTFE | P2 | Graphite | ||
| STEM TIPS | T1 | Non-rotating (316 stainless) | T6 | Ball (carbide)** | T8 | Ball (Monel)** |
| T5 | Ball (440C stainless) ** | T7 | Ball (ceramic)** | T9 | Non-rotating regulating (316 Stainless)** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR |
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.*Other o-ring materials available on request.
* Other o-ring materials available on request.
** For 2000 Series only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 2100-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
