NOSHOK 5030-FFS, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Natural Gas Manifold Valve

Part Number: 5030-FFS
Online Prices

NOSHOK List price: Original price was: $534.50.Current price is: $337.50.

45 in stock

Avalable For immediate Delivery
Warranty: 3 YR
WE ALWAYS DO BETTER THAN PRICE MATCH

Noshok 5030-FFS, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Natural Gas Manifold Valve

https://www.noshok.com/products/valves/manifold-valves/5-valve-natural-gas-manifold/5030-5130-series-5-valve-natural-gas-manifold-valves-hard-seat-soft-seat-tip/

5 Valve Manifold, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS, 0.187″ Orifice

ORDERING INFORMATION

SERIES 5 5-valve
SEATS 0 Hard seat 1 Soft seat/tip
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT or flange
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 5 5-valve
SEATS 0 Hard seat 1 Soft seat/tip
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT or flange
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™
SOFT SEATS PK1 PEEK KF1 PCTFE
PACKINGS P1 PTFE P2 Graphite **
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic
HL3 1″ Round knurled HL5 1-3/4″ Phenolic

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

Description

Noshok 5030-FFS, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS Natural Gas Manifold Valve

https://www.noshok.com/products/valves/manifold-valves/5-valve-natural-gas-manifold/5030-5130-series-5-valve-natural-gas-manifold-valves-hard-seat-soft-seat-tip/

5 Valve Manifold, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS, 0.187″ Orifice

ORDERING INFORMATION

SERIES 5 5-valve
SEATS 0 Hard seat 1 Soft seat/tip
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT or flange
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES 5 5-valve
SEATS 0 Hard seat 1 Soft seat/tip
PROCESS TYPE 3 Natural gas flow
CONNECTION 0 1/2″ NPT or flange
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™
SOFT SEATS PK1 PEEK KF1 PCTFE
PACKINGS P1 PTFE P2 Graphite **
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic
HL3 1″ Round knurled HL5 1-3/4″ Phenolic

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.