Noshok 5030-MFS-FP Hard Seat, Flange x 1/2 NPT Female, 316 SS, Flare Pattern 5 Gas Valve Manifold

5 Valve Manifold, Hard Seat, Flange x 1/2 NPT Female, 316 SS, Flare Pattern

5030/5130 Series 5-Valve Natural Gas Manifold Valves, Hard Seat & Soft Seat/Tip

 

 

• Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
• Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
• Soft tip valves feature a patented Delrin^® non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
• Available in block, single flange, or double flange connection for remote
  or direct installation
• 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance
  and reliability
• 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
• 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
• 5130 Series valves also feature a replaceable Delrin^® seat, and straight through porting for bidirectional, high capacity flow and easy roddable
  cleaning on the block valves
• Blow-out proof stem provides a secondary stem seal in the full
  open position
• FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil^® packing optional
• All stems are 316 stainless steel
• All stem threads are rolled for strength and ease of operation
• One-piece bonnet with a metal-to-metal seal to the valve body below
  the bonnet threads
• Slotted spring pin to prevent accidental loosening
• Vinyl dust caps for bonnets and stems (non-packing)
• Patented body-to-bonnet, metal-to-metal seal is designed to significantly
  increase the pressure range of the valve (U.S. Patent 7,758,014)
   

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
*   Other o-ring materials available on request.
**  For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel.
When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map