-62%
125 in stock
NOSHOK 800-2-2-300-2 Electronic Indicating Pressure Transmitter/Switch-0 psig to 300 psig
Original price was: $710.90.$578.50Current price is: $578.50.
NOSHOK 100L-1-31-50/150-78 Mechanical Compact SPST Pressure Switch
Original price was: $49.54.$37.50Current price is: $37.50.
NOSHOK 5100 SERIES SOFT SEAT 5 NATURAL GAS FLOW VALVE MANIFOLD
Original price was: $625.99.$235.00Current price is: $235.00.
Noshok 5100 SERIES SOFT SEAT 5 NATURAL GAS FLOW VALVE MANIFOLD
5030/5130 Series 5-Valve Natural Gas Manifold Valves, Hard Seat & Soft Seat/Tip
Application Brochures
Water/
Wastewater
Wastewater
Oil & Gas
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEATS | 0 | Hard seat | 1 | Soft seat/tip | ||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| PACKINGS† | P1 | PTFE | P2 | Graphite ** | ||||
| STEM TIPS | T1 | Non-rotating (316 stainless)** | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Acetal*** |
| T2 | Acetal*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PTCFE*** | |
| T3 | PTCFE*** | T6 | Ball (carbide)** | T9 | Non-rotating regulating (316 Stainless)** | T12 | Regulating PEEK*** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
| SPECIFICATIONS | |
| Materials | Zinc-nickel plated carbon steel, electropolished 316 Stainless Steel |
| Connections | Flange-Flange 1/2" NPT-Flange 1/2" NPT-1/2" NPT |
| Pressure ratings* | Hard Seat: 10,000 psi @ 200 °F Soft Seat: 6,000 psi @ 200 °F |
| Orifice size | 0.187" |
| Flow coefficient | Hard Seat: CV 0.44 Soft Seat/tip: CV 0.76 |
| Steam seal & type | All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads. |
| Additional features | Two static (test) ports, color coded vinyl bonnet and stem dust cap, patented soft seat/tip stem design on equalizing and vent valves |
| Options | Panel mountings, o-ring materials, handles, packings, regulating stem and stem tips |
| Weight | Approximately 4.2 lb. without flange Approximately 6.0 lb. with flange |
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.
Description
Noshok 5100 SERIES SOFT SEAT 5 NATURAL GAS FLOW VALVE MANIFOLD
5030/5130 Series 5-Valve Natural Gas Manifold Valves, Hard Seat & Soft Seat/Tip
Application Brochures
Water/
Wastewater
Wastewater
Oil & Gas
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEATS | 0 | Hard seat | 1 | Soft seat/tip | ||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| PACKINGS† | P1 | PTFE | P2 | Graphite ** | ||||
| STEM TIPS | T1 | Non-rotating (316 stainless)** | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Acetal*** |
| T2 | Acetal*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PTCFE*** | |
| T3 | PTCFE*** | T6 | Ball (carbide)** | T9 | Non-rotating regulating (316 Stainless)** | T12 | Regulating PEEK*** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
