NOSHOK 5130-MFC-FP Soft Seat, Flange x 1/2 NPT Female, Steel, Flare Pattern 5 Valve Manifold NOSHOK List price: Original price was: $402.06.Current price is: $289.20.
Back to products
Noshok 5150-A 1/2 NPT Sintered Snubber for gases 316SS, "A" Disc Installed NOSHOK List price: Original price was: $81.34.Current price is: $64.50.

NOSHOK 5130-MMS Soft Seat, Flange x Flange, 316 SS 5-Valve Natural Gas Manifold Valve

Part Number: 5130-MMS
Online Prices

NOSHOK List price: Original price was: $613.72.Current price is: $459.20.

Warranty: 3 YR

NOSHOK 5130-MMS 5 Valve Manifold, Soft Seat, Flange x Flange, 316 SS

5030/5130 Series 5-Valve Natural Gas Manifold Valves, Hard Seat & Soft Seat/Tip

 

 

  • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
  • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Available in block, single flange, or double flange connection for remote
    or direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
  • 5130 Series valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable
    cleaning on the block valves
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below
    the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
    increase the pressure range of the valve (U.S. Patent 7,758,014)
     
Dimensions  Print Catalog Page
 

 

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Grafoil®**        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Delrin®***
T2 Delrin® (Acetal)*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Regulating hard** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
*   Other o-ring materials available on request.
**  For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel.
When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

 
 
NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.

Description

NOSHOK 5130-MMS 5 Valve Manifold, Soft Seat, Flange x Flange, 316 SS

5030/5130 Series 5-Valve Natural Gas Manifold Valves, Hard Seat & Soft Seat/Tip

 

 

  • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
  • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
  • Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Available in block, single flange, or double flange connection for remote
    or direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
  • 5130 Series valves also feature a replaceable Delrin® seat, and straight through porting for bidirectional, high capacity flow and easy roddable
    cleaning on the block valves
  • Blow-out proof stem provides a secondary stem seal in the full
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below
    the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly
    increase the pressure range of the valve (U.S. Patent 7,758,014)
     
Dimensions  Print Catalog Page
 

 

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 5130-MFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM and T1 hard non-rotating (316SS standard) stem tip is the only option
available for the Isolation valves on the 5130 Series. All other stem tip options are available for the equalize and vent valves.

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Grafoil®**        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Delrin®***
T2 Delrin® (Acetal)*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Regulating hard** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
*   Other o-ring materials available on request.
**  For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel.
When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

 
 
NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | Fax 440.243.3472 | Webmaster | Site Map
©2017 NOSHOK. ALL RIGHTS RESERVED.