NOSHOK 5530-MFS-FP Soft Seat, Flange x 1/2 NPT Female, 316 SS, Flare Pattern Natural Gas Manifold Valve
Original price was: $836.53.$535.25Current price is: $535.25.
103 in stock
NOSHOK 5530-MFS-FP Soft Seat, Flange x 1/2 NPT Female, 316 SS, Flare Pattern Natural Gas Manifold Valve
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375” Orifice)
Application Brochures
Wastewater
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
| FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
| MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
| SPECIFICATIONS | |
| Materials | Zinc-nickel plated carbon steel, electropolished 316 Stainless Steel |
| Connections | Flange-Flange 1/2" NPT-Flange 1/2" NPT-1/2" NPT Flange-flange 90° angle |
| Pressure ratings | 6,000 psi @ 200 °F |
| Orifice size | 0.375" |
| Flow coefficient | CV 3.0 |
| Stem seal & type | All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads |
| Additional features | Two static (test) ports, color coded vinyl bonnet and stem dust cap, patented soft tip stem design on equalizing and vent valves |
| Weight | Approximately 5.8 lb. without flange Approximately 7.5 lb. with flange |
Description
NOSHOK 5530-MFS-FP Soft Seat, Flange x 1/2 NPT Female, 316 SS, Flare Pattern Natural Gas Manifold Valve
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375” Orifice)
Application Brochures
Wastewater
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
ORDERING INFORMATION
| SERIES | 5 | 5-valve | ||||
| SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
| PROCESS TYPE | 3 | Natural gas flow | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
| FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
| MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
| BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
