-37%
NOSHOK 25-500-400-psi/kPa-SG-ST8 1/4 NPT Bottom Connection 2.5 Stainless Steel Gauge Glycerin Filled, Safety Glass Lens, 0.8 mm SS Threaded Orifice
NOSHOK List price: $188.62 Original price was: $188.62.$110.00Current price is: $110.00.
NOSHOK 25-310-400-psi-CBU CHROME BEZEL WITH CLAMP 1/4" NPT Back Connection 2.5" Brass Case Pressure Gauge
NOSHOK List price: $172.69 Original price was: $172.69.$119.50Current price is: $119.50.
NOSHOK 5530-MMAS-FP Soft Seat, Flange x Flange Angle 316 SS, Flare Pattern 5 Valve Manifold
Part Number:
5530-MMAS-FP
Online Prices
NOSHOK List price: $1,593.50 Original price was: $1,593.50.$999.99Current price is: $999.99.
5530-MMAS-FP 5 Valve Manifold, Soft Seat, Flange x Flange, Angle, 316 SS, Flare Pattern
NOSHOK 3070-MFS 1/2 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat valve
Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)
- Designed for use with differential pressure transmitters incorporating two
isolation valves, two equalizing valves and a vent valve in natural gas
applications - Flare Pattern™ valve configuration provides maximum clearance for
fingers during operation - Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
back-up metal-to-metal seal (U.S. Patent 6,820,857) - Non-rotating stem tip standard on large bore shut-off valves
- Available in block, single flange, or double flange connection for remote or
direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning on the
block valves - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
SERIES | 5 | 5-valve | ||||
SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
PROCESS TYPE | 3 | Natural gas flow | ||||
CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
https://massmeasure.com/noshok/product/noshok-5030-5130-series-5-valve-hard-seat-natural-gas-manifold-valves/
* Only available in Flare Pattern™ configuration.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.
Description
5530-MMAS-FP 5 Valve Manifold, Soft Seat, Flange x Flange, Angle, 316 SS, Flare Pattern
NOSHOK 3070-MFS 1/2 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat valve
Noshok 502-MFC 1/4 NPT, Male x Female, Steel Soft Seat Needle Valve “T” handle
5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)
- Designed for use with differential pressure transmitters incorporating two
isolation valves, two equalizing valves and a vent valve in natural gas
applications - Flare Pattern™ valve configuration provides maximum clearance for
fingers during operation - Soft tip valves feature a patented Delrin® non-rotating soft tip stem, and a
back-up metal-to-metal seal (U.S. Patent 6,820,857) - Non-rotating stem tip standard on large bore shut-off valves
- Available in block, single flange, or double flange connection for remote or
direct installation - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Delrin® seat, and straight through porting for
bidirectional, high capacity flow and easy roddable cleaning on the
block valves - Blow-out proof stem provides a secondary stem seal in the full
open position - FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
SERIES | 5 | 5-valve | ||||
SEAT | 5 | Soft seat/tip 0.375″ orifice | ||||
PROCESS TYPE | 3 | Natural gas flow | ||||
CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
VALVE TYPE | MFC | Flange-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
FFC | Female-Female, Steel | MMC | Flange-Flange, Steel | MMAS* | Flange-Flange 90° Angle, Stainless Steel | |
MFS | Flange-Female, Stainless Steel | MMAC* | Flange-Flange 90° Angle, Steel | MMS | Flange-Flange, Stainless Steel |
https://massmeasure.com/noshok/product/noshok-5030-5130-series-5-valve-hard-seat-natural-gas-manifold-valves/
* Only available in Flare Pattern™ configuration.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.