Noshok 5530-MMC-FP Soft Seat, Flange x Flange, Steel, Flare Pattern 5-Valve Natural Gas Manifold Valve

Noshok 5530-MMC-FP 5 Valve Manifold, Soft Seat, Flange x Flange, Steel, Flare Pattern

5530 Series 5-Valve Natural Gas Manifold Valves, Soft Seat/Tip (0.375″ Orifice)

 

• Designed for use with differential pressure transmitters incorporating two
  isolation valves, two equalizing valves and a vent valve in natural gas
  applications
• Flare Pattern™ valve configuration provides maximum clearance for
  fingers during operation
• Soft tip valves feature a patented Delrin^® non-rotating soft tip stem, and a
  back-up metal-to-metal seal (U.S. Patent 6,820,857)
• Non-rotating stem tip standard on large bore shut-off valves
• Available in block, single flange, or double flange connection for remote or
  direct installation
• 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and reliability
• Soft seat design has 6,000 psi pressure rating @ 200 °F
• Features a replaceable Delrin^® seat, and straight through porting for
  bidirectional, high capacity flow and easy roddable cleaning on the
  block valves
• Blow-out proof stem provides a secondary stem seal in the full
  open position
• FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
• All stems are 316 stainless steel
• All stem threads are rolled for strength and ease of operation
• One-piece bonnet with a metal-to-metal seal to the valve body below the
  bonnet threads
• Slotted spring pin to prevent accidental loosening
• Vinyl dust caps for bonnets and stems
• Non-rotating stem tip standard on isolation valves
   

To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:

ORDERING INFORMATION – Additional Options

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

* Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves si FKM and the standard handles are isolation “T” handles (HL8) and equalizing/vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 5530-MFC
will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special
application requests.