-25%
Noshok 602-MFS-EM1-PM2 1/4 NPT, Male x Female, 316 SS, EPDM O-Ring, Panel Mount, Hard Seat Block & Bleed Valve
NOSHOK List price: $279.95 Original price was: $279.95.$136.50Current price is: $136.50.
Noshok 604-MFS-EM1-PM2 1/2 NPT, Male x Female, 316 SS, EPDM O-Ring, Panel Mount, Hard Seat Block & Bleed Valve
NOSHOK List price: $244.29 Original price was: $244.29.$139.50Current price is: $139.50.
Noshok 602-MFS-NB1 1/4 NPT, Male x Female, 316 SS, NBR-O-Ring, Hard Seat Block & Bleed Valve
Part Number:
602-MFS-NB1
Online Prices
NOSHOK List price: $186.68 Original price was: $186.68.$139.99Current price is: $139.99.
602-MFS-NB1 1/4 NPT, Male x Female, 316 SS, NBR-O-Ring, Hard Seat Block & Bleed Valve
- Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 10,000 psi pressure rating @ 200 °F
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
- 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw
Description
602-MFS-NB1 1/4 NPT, Male x Female, 316 SS, NBR-O-Ring, Hard Seat Block & Bleed Valve
- Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 10,000 psi pressure rating @ 200 °F
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust cap for bonnet and stem (non-packing)
- 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw