Noshok 602-MFS-PM1-HL1 1/4 NPT, Male x Female, 316 SS, Panel Mount, Mini T Handle, Hard Seat Block & Bleed Valve NOSHOK List price: Original price was: $247.46.Current price is: $142.25.
Back to products
Noshok 60-400-1000-psi 1/2 NPT Bottom Conn 6 dry Stainless Steel Gauge NOSHOK List price: Original price was: $596.33.Current price is: $417.43.
-44%
Click to enlarge

Noshok 602-MFS-PM2 1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Block & Bleed Valve

Part Number: 602-MFS-PM2
Online Prices

NOSHOK List price: Original price was: $247.26.Current price is: $137.99.

Warranty: 3 YR
Add to wishlist
Compare

602-MFS-PM2 1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Block & Bleed Valve

1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Block & Bleed Valve, 0.187″ Orifice
  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 10,000 psi pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw

Description

602-MFS-PM2 1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Block & Bleed Valve

1/4 NPT, Male x Female, 316 SS, Panel Mount, Hard Seat Block & Bleed Valve, 0.187″ Orifice
  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 10,000 psi pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw