-63%

Block & Bleed Valve, Hard Seat, 1/2 NPT Female - 1/2 NPT Female, 316 SS, 0.187" Orifice, Graphite Packing

604-FFS Hard Seat Block & Bleed Valve 1/2 NPT, Female x Female, 316 SS-noshok - Image 2

604-FFS Hard Seat Block & Bleed Valve 1/2 NPT, Female x Female, 316 SS-noshok

Part Number: 604-FFS

Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
100% helium leak tested to 1 x 10^-4ml/s for guaranteed performance and reliability
10,000 psi pressure rating @ 200 °F
Blow-out proof stem provides a secondary stem seal in the full open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
All stems are 316 Stainless Steel
All stem threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust cap for bonnet and stem (non-packing)
0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw

List Price Original price was: $278.95.Current price is: $104.50.

180 in stock

Description
SPECIFICATIONS

NOSHOK 604-FFS 1/2 NPT, Female x Female, 316 SS, Hard Seat Block & Bleed Valve

Block & Bleed Valve, Hard Seat, 1/2 NPT Female – 1/2 NPT Female, 316 SS, 0.187″ Orifice

NOSHOK 602-MFC 1/4 NPT, Male x Female Steel Hard Seat Block & Bleed Valve

600 Series Block & Bleed, Hard Seat Needle Valves

Pressure Gauge, 2.5″ 304SS Case, 316SS Internals, 2000 psi, 1/4 NPT Male Bottom Conn, Glycerin Filled

NOSHOK 3070-MFC 1/2 NPT, Male x Female Steel 3-Valve Double Block & Bleed Hard Seat

Application Brochures

Water/
Wastewater

Oil & Gas

If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.

ORDERING INFORMATION

SERIES	6	600 Series, hard seat
CONNECTION SIZES	02	1/4″ NPT	04	1/2″ NPT
VALVE TYPES	MFC	Male-Female, Steel	MFS	Male-Female, Stainless Steel
	FFC	Female-Female, Steel	FFS	Female-Female, Stainless Steel

ORDERING INFORMATION – Additional Options

PACKINGS^†	P1	PTFE	P2	Graphite
STEM TIPS	T1	Non-rotating (316 stainless)	T6	Ball (carbide)	T8	Ball (Monel)
	T5	Ball (440C stainless)	T7	Ball (ceramic)	T9	Non-rotating regulating (316 Stainless)
O-RINGS*	EM1	EPDM	KZ1	FFKM (Kalrez® 3018 or equivalent)	NB1	NBR
PANEL MOUNTINGS	PM1	Panel mount (1 nut)	PM2	Panel mount (2 nuts)
HANDLES	HL4	1-3/8″ Phenolic	HL5	1-3/4″ Phenolic

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are “T” handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 602-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

SPECIFICATIONS
Materials	Zinc-nickel plated steel, electropolished; 316 Stainless Steel
Connections	1/4" & 1/2" NPT Male-female & Female-female configurations
Pressure ratings*	10,000 psi @ 200 °F
Orifice size	0.187"
Flow coefficient	C_V 0.44
Steam seal & type	All 316 Stainless Steel stems with FKM o-ring and PTFE back-up ring below the threads, PTFE or Graphite packing optional
Options	Panel mountings, o-ring materials, handles, packings, regulating stem and stem tips
Weight	Approximately 1.3 lb. up to 1/2" Approximately 4.5 lb. Large Hex, Female-Female Approximately 6 lb. Large Hex, Male-Female

* If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.

All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.

Description