Noshok 702-FFS-T1 1/4 NPT, Female x Female, 316 SS, Non-Rotating Tip 316 SS, Soft Seat Block & Bleed Valve NOSHOK List price: Original price was: $160.41.Current price is: $128.33.
Back to products
Noshok 704-FFS-EM1-PM1-HL1 1/2 NPT, Female x Female, 316 SS, EPDM O-Ring, Panel Mount, Mini T Handle, Soft Seat Block & Bleed Valve NOSHOK List price: Original price was: $225.00.Current price is: $142.96.
-43%
Click to enlarge

NOSHOK 702-MFS-EM1-PM1-HL4 1/4 NPT, Male x Female, 316 SS, EPDM O-Ring, Panel Mount, 1-3/8 Phenolic Handle, Soft Seat Block & Bleed Valve

Part Number: 702-MFS-EM1-PM1-HL4
Online Prices

NOSHOK List price: Original price was: $290.16.Current price is: $165.50.

Warranty: 3 YR
Add to wishlist
Compare

702-MFS-EM1-PM1-HL4 1/4 NPT, Male x Female, 316 SS, EPDM O-Ring, Panel Mount, 1-3/8 Phenolic Handle, Soft Seat Block & Bleed Valve

  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw

Description

702-MFS-EM1-PM1-HL4 1/4 NPT, Male x Female, 316 SS, EPDM O-Ring, Panel Mount, 1-3/8 Phenolic Handle, Soft Seat Block & Bleed Valve

  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw