High Accuracy Fixed Range Pressure Transmitter, 0 to 150 psi gauge, ±0.25% of span, non-linearity best fit straight line per IEC 61298-2 at reference conditions, 4 mA to 20 mA, 2-wire, 1/4 NPT male, M12 x 1 4 pin, Certified Calibration
NOSHOK 615-10-1-1-8-8 - PT40-10psig-1-1-8-8 cross over part List Price Original price was: $537.65.Current price is: $430.25.
Back to products
NOSHOK-25-500-300-psi/kPa 1/4 NPT Bottom Conn, 2.5 Stainless Steel Pressure Gauge, Glycerin Filled-300 psi
NOSHOK-25-500-300-psi/kPa 1/4 NPT Bottom Conn, 2.5 Stainless Steel Pressure Gauge, Glycerin Filled-300 psi List Price Original price was: $145.61.Current price is: $75.25.
-54%
Block & Bleed Valve, Hard Seat, 1/2 NPT Female - 1/2 NPT Female, 316 SS, 0.187" Orifice, Graphite Packing

NOSHOK -704-MFS-PM2 1/2 NPT, Male x Female, 316 SS, Panel Mount, Soft Seat Block & Bleed Valve

Part Number: 704-MFS-PM2

List Price Original price was: $327.52.Current price is: $149.52.

41 in stock

PRICES NOW REFLECT IEEPA/Other Tariff Surcharges-
NEED TO PURCHASE IN BULK ?
Custom-Built NOSHOK Gauges Available!
Add to wishlist
Compare

704-MFS-PM2 1/2 NPT, Male x Female, 316 SS, Panel Mount, Soft Seat Block & Bleed Valve

Block & Bleed Valve, Soft Seat, 1/2 NPT Male – 1/2 NPT Female, 316 SS, 0.187″ Orifice, Panel Mount (2 nuts)

  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw

Description

704-MFS-PM2 1/2 NPT, Male x Female, 316 SS, Panel Mount, Soft Seat Block & Bleed Valve

Block & Bleed Valve, Soft Seat, 1/2 NPT Male – 1/2 NPT Female, 316 SS, 0.187″ Orifice, Panel Mount (2 nuts)

  • Block & bleed design allows pressure to be bled off without disturbing the permanent piping installation, allowing quick and easy removal or replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Acetal seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090″ bleed hole located on the bottom is controlled by a 1/4″-20 UNF-2A bleed screw