NOSHOK 804-MS 1/2 NPT, Male, 316 SS, 1-3/8″ mini “T” handles Hard Seat Bleed Valve

804-MS 1/2 NPT, Male, 316 SS, Hard Seat Bleed Valve

Bleed Valve, Hard Seat, 1/2 NPT Male, 316 SS, 0.159″ Bleed Port

800/850 Series Bleed, Hard Seat & Soft Tip Needle Valves

 

 

• Bleed valves provide a convenient means to relieve process pressures
  trapped between a shut off valve and the instrument
• Uses the same bonnet assemblies of the 100/150 Series mini valves with
  an integrated single threaded body for insertion in vent port
• Soft tip valves feature a patented Delrin^® non-rotating soft tip stem, and
  a back-up metal-to-metal seal (U.S. Patent 6,820,857)
• 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance and
  reliability 10,000 psi hard seat pressure rating @ 200 °F
• Available in zinc-nickel plated steel, electropolished stainless steel, and brass
• FKM o-ring seal and PTFE back-up ring below the stem threads to protect
  from corrosion and galling; PTFE or Grafoil^® (800 Series only) packing optional
• All stems are 316 stainless steel
• All stem threads are rolled for strength and ease of operation
• 0.159″ bleed port
• Patented body-to-bonnet, metal-to-metal seal is designed to significantly
  increase the pressure range of the valve (U.S. Patent 7,758,014)

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 802-MC-EM1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.

*   Other o-ring materials available on request.
**  For 800 Series only.
*** For 850 Series only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are 1″ round knurled handles (HL3) on brass, and 1-3/8″ mini “T” handles (HL7) on stainless steel and steel.

The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL7) on the 802-MC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.