-33%
NOSHOK 5132-MFC-FP FLARE PATTEREN Soft Seat, Flange x 1/4 NPT Female, Steel 5-Valve Natural Gas Manifold Valve
NOSHOK List price: $402.06 Original price was: $402.06.$299.99Current price is: $299.99.
Noshok 25-210-3-psi-BP3 1/4 NPT Back Conn 2.5 DRY Diaphragm Gauge, 0.3 mm Brass PRESS FIT Orifice
NOSHOK List price: $88.69 Original price was: $88.69.$66.51Current price is: $66.51.
Noshok 5130-MFS-PK1 Peek seat Soft Seat Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve
Part Number:
5130-MFS-PK1
Online Prices
NOSHOK List price: $621.16 Original price was: $621.16.$419.14Current price is: $419.14.
Noshok 5130-MFS-PK1 Peek seat Soft Seat Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve
Gas Manifold Valve
Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Available in block, single flange, or double flange connection for remote or direct installation
100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
Blow-out proof stem provides a secondary stem seal in the full open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
All stems are 316 Stainless Steel
All stem threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust caps for bonnets and stems (non-packing)
Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure
ORDERING INFORMATION
SERIES | 5 | 5-valve | ||||
SEATS | 0 | Hard seat | 1 | Soft seat/tip | ||
PROCESS TYPE | 3 | Natural gas flow | ||||
CONNECTION | 0 | 1/2″ NPT or flange | ||||
VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
PACKINGS† | P1 | PTFE | P2 | Graphite ** | ||||
STEM TIPS | T1 | Non-rotating (316 stainless)** | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Acetal*** |
T2 | Acetal*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PTCFE*** | |
T3 | PTCFE*** | T6 | Ball (carbide)** | T9 | Non-rotating regulating (316 Stainless)** | T12 | Regulating PEEK*** | |
O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||||
HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
Description
Noshok 5130-MFS-PK1 Peek seat Soft Seat Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve
Gas Manifold Valve
Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Available in block, single flange, or double flange connection for remote or direct installation
100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
Blow-out proof stem provides a secondary stem seal in the full open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
All stems are 316 Stainless Steel
All stem threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust caps for bonnets and stems (non-packing)
Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure
ORDERING INFORMATION
SERIES | 5 | 5-valve | ||||
SEATS | 0 | Hard seat | 1 | Soft seat/tip | ||
PROCESS TYPE | 3 | Natural gas flow | ||||
CONNECTION | 0 | 1/2″ NPT or flange | ||||
VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
ORDERING INFORMATION – Additional Options
BODY CONFIGURATION | FP | Flare Pattern™ | ||||||
SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
PACKINGS† | P1 | PTFE | P2 | Graphite ** | ||||
STEM TIPS | T1 | Non-rotating (316 stainless)** | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Acetal*** |
T2 | Acetal*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PTCFE*** | |
T3 | PTCFE*** | T6 | Ball (carbide)** | T9 | Non-rotating regulating (316 Stainless)** | T12 | Regulating PEEK*** | |
O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
HANDLES | HL1 | 1-13/16″ Mini “T” | HL4 | 1-3/8″ Phenolic | ||||
HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.