NOSHOK 5132-MFC-FP FLARE PATTEREN Soft Seat, Flange x 1/4 NPT Female, Steel 5-Valve Natural Gas Manifold Valve NOSHOK List price: Original price was: $402.06.Current price is: $299.99.
Back to products
Noshok 2170-MFS-PK1 PEAK ADDER 1/2 NPT, Male x Female, 316 SS Soft Seat/Tip 2-Valve Block & Bleed NOSHOK List price: Original price was: $332.65.Current price is: $249.58.

Noshok 5130-MFS-PK1 Peek seat Soft Seat Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve

Part Number: 5130-MFS-PK1
Online Prices

NOSHOK List price: Original price was: $621.16.Current price is: $419.14.

Warranty: 3 YR

Noshok 5130-MFS-PK1 Peek seat Soft Seat  Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve

Gas Manifold Valve
Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Available in block, single flange, or double flange connection for remote or direct installation
100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
Blow-out proof stem provides a secondary stem seal in the full open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
All stems are 316 Stainless Steel
All stem threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust caps for bonnets and stems (non-packing)
Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

 

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Graphite **        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

Description

Noshok 5130-MFS-PK1 Peek seat Soft Seat  Flange x 1/2 NPT Female, 316 SS 5 Gas Manifold Valve

Gas Manifold Valve
Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Available in block, single flange, or double flange connection for remote or direct installation
100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
Blow-out proof stem provides a secondary stem seal in the full open position
FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
All stems are 316 Stainless Steel
All stem threads are rolled for strength and ease of operation
One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
Slotted spring pin to prevent accidental loosening
Vinyl dust caps for bonnets and stems (non-packing)
Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

 

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Graphite **        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.