-34%
Noshok 2703-FFS 3/8" NPT Female - 3/8" NPT Female 2-Valve Block & Bleed Manifold Valve
NOSHOK List price: Original price was: $295.38.$222.25Current price is: $222.25.
Noshok 25-900-30 inHg to 0 to 100 psi-kPa 1/4" NPT Bottom Conn 2.5"ABS Case Filled Gauge
NOSHOK List price: Original price was: $69.75.$28.99Current price is: $28.99.
Noshok 2603-FFS 0.156″ 3/8″ NPT Female – 3/8″ NPT Female 316 Stainless Steel HARD SEAT – 2 VALVE MANIFOLD
Online Prices
NOSHOK List price: Original price was: $325.63.$214.00Current price is: $214.00.
Noshok 2603-FFS 0.156″ 3/8″ NPT Female – 3/8″ NPT Female 316 Stainless Steel HARD SEAT – 2 VALVE MANIFOLD
2603/2703 & 2604/2704 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Tip (0.156″ Orifice)
- Combines isolating and venting in a single valve, eliminating the need
for tubing and fittings - Block valve isolates the downstream process fluids and the bleed valve
exhausts upstream fluids enabling static pressure transmitters, switches
or gauges to be removed without disturbing the permanent piping installation - Block valve is located on the right and the bleed valve is located on top in
a 90° orientation, venting is to the left - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
and reliability - Soft tip valves feature a patented Delrin® non-rotating soft tip stem,
and a back-up metal-to-metal seal (U.S. Patent 6,820,857) - 2603/2604 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
- 2703/2704 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect
from corrosion and galling; PTFE or Grafoil® packing optional - All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems (non-packing)
- Patented body-to-bonnet, metal-to-metal seal is designed to significantly
increase the pressure range of the valve (U.S. Patent 7,758,014)
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEATS | 6 | Hard seat | 7 | Soft tip | ||
| PROCESS TYPE | 0 | Static pressure | ||||
| CONNECTIONS | 3 | 3/8″ NPT | 4 | 1/2″ NPT | ||
| VALVE TYPES | FFC | Female-Female, Steel | FFCR | Female-Female, Steel, Right Vent | ||
| FFS | Female-Female, Stainless Steel | FFSR | Female-Female, Stainless Steel, Right Vent |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2704-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM.
ORDERING INFORMATION – Additional Options
| PACKINGS | P1 | PTFE | P2 | Grafoil®** | ||||
| STEM TIPS | T1 | Non-rotating (316 stainless) | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Delrin®*** |
| T2 | Delrin® (Acetal)*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PCTFE*** | |
| T3 | PCTFE*** | T6 | Ball (carbide)** | T9 | Regulating hard** | T12 | Regulating PEEK*** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | ||||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
** Hard seat only.
*** Soft tip only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handle (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL1) on the 2704-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
NOSHOK, INC. 1010 W. Bagley Road | Berea, OH 44017 | Ph 440.243.0888 | F
Description
Noshok 2603-FFS 0.156″ 3/8″ NPT Female – 3/8″ NPT Female 316 Stainless Steel HARD SEAT – 2 VALVE MANIFOLD
2603/2703 & 2604/2704 Series 2-Valve Block & Bleed Manifold Valves
Hard Seat & Soft Tip (0.156″ Orifice)
- Combines isolating and venting in a single valve, eliminating the need
for tubing and fittings - Block valve isolates the downstream process fluids and the bleed valve
exhausts upstream fluids enabling static pressure transmitters, switches
or gauges to be removed without disturbing the permanent piping installation - Block valve is located on the right and the bleed valve is located on top in
a 90° orientation, venting is to the left - 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
and reliability - Soft tip valves feature a patented Delrin® non-rotating soft tip stem,
and a back-up metal-to-metal seal (U.S. Patent 6,820,857) - 2603/2604 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
- 2703/2704 Series soft tip valves have 6,000 psi pressure rating @ 200 °F
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect
from corrosion and galling; PTFE or Grafoil® packing optional - All stems are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the
bonnet threads - Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems (non-packing)
- Patented body-to-bonnet, metal-to-metal seal is designed to significantly
increase the pressure range of the valve (U.S. Patent 7,758,014)
ORDERING INFORMATION
| SERIES | 2 | 2-valve | ||||
| SEATS | 6 | Hard seat | 7 | Soft tip | ||
| PROCESS TYPE | 0 | Static pressure | ||||
| CONNECTIONS | 3 | 3/8″ NPT | 4 | 1/2″ NPT | ||
| VALVE TYPES | FFC | Female-Female, Steel | FFCR | Female-Female, Steel, Right Vent | ||
| FFS | Female-Female, Stainless Steel | FFSR | Female-Female, Stainless Steel, Right Vent |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 2704-FFC-P1)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.
NOTE 3: The standard o-ring in all the NOSHOK manifold valves is FKM.
ORDERING INFORMATION – Additional Options
| PACKINGS | P1 | PTFE | P2 | Grafoil®** | ||||
| STEM TIPS | T1 | Non-rotating (316 stainless) | T4 | PEEK*** | T7 | Ball (ceramic)** | T10 | Regulating Delrin®*** |
| T2 | Delrin® (Acetal)*** | T5 | Ball (440C stainless)** | T8 | Ball (Monel)** | T11 | Regulating PCTFE*** | |
| T3 | PCTFE*** | T6 | Ball (carbide)** | T9 | Regulating hard** | T12 | Regulating PEEK*** | |
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Kalrez® 3018 or equivalent) | NB1 | NBR | ||
| HANDLES | HL2 | 2-1/2″ “T” | HL4 | 1-3/8″ Phenolic | ||||
| HL3 | 1″ Round knurled | HL5 | 1-3/4″ Phenolic |
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
* Other o-ring materials available on request.
** Hard seat only.
*** Soft tip only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handle (HL2) and bleed 1-3/8″ mini “T” handle (HL7).
The handle material will always match the material of the valve, unless otherwise specified. For example, the mini “T” handle (HL1) on the 2704-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
