NOSHOK PTI30-1450psig-1-43-73-28-TC-CC High Accuracy Intelligent Pressure Transmitter, Min. span 290 psi, max. span 1,450 psi (lowest vacuum pressure -15 psig), ?0.1% of adjusted span with 10:1 turn down, 4 mA to 20 mA, 2-wire with HART, 1 NPT male flush, 1/2 NPT female, transparent cover, Certified Calibration
$1,518.36 Original price was: $1,518.36.$1,313.25Current price is: $1,313.25.
NOSHOK PT40-2000psig-1-1-45-17 High Accuracy Fixed Range Pressure Transmitter, 0 to 2000 psi, 0.25% of span, 4 mA to 20 mA, 2-wire, 7/16-20 male SAE J514 FIG 34B (non-adjustable), DIN form C with 3 ft cable
$503.07 Original price was: $503.07.$402.46Current price is: $402.46.
“NOSHOK 850-1-48–4/248-2-120-6 Electronic Indicating Temperature Transducer/Switch, 2 NO or 2 NC Switches (PNP), 1/2 NPT Male Sliding Compression Fitting, -4 to 248 F, M12 x 1 (4-Pin), 12 in Stem, 6 mm Diameter” has been added to your cart. Continue shopping
NOSHOK 25-02S-S-02S Diaphragm Seal- Standard & Elevated Pressure, Non-Replaceable Diaphragm Seal
Part Number:
25-02S-S-02S
- Designed to isolate the pressure measuring instrument from corrosive or viscous process media
- Utilize an all welded, all metallic housing design to eliminate potential leak paths
- For use with gauges with dial sizes of 2-1/2" and smaller, and pressure ranges no less than 100 psig
- Housing and diaphragm offered in a variety of materials to suit most applications
- A flushing port is available to clean wetted areas and prevent process media build up
- Consider instrument size, pressure range, media composition, ambient and operating temperature, and maximum working pressure when selecting
- Capillaries and cooling elements are available for elevated process temperatures, see options & accessories below
- Fill fluid must be compatible with process media; i.e. Glycerin may become volatile in conjunction with a strong oxidizin
$144.77 Original price was: $144.77.$87.50Current price is: $87.50.
Noshok 25-02S-S-02S Type 25 Diaphragm Seal
Welded Diaphragm Seal, Standard Pressure, 1/4″ NPT Instrument Conn, 316 Stainless Steel, 316 Stainless Steel Diaphragm, 1/4″ NPT Process Conn, 316 Stainless Steel
Type 25/25H Standard & Elevated Pressure, Non-Replaceable Diaphragm Seals
Application Brochures
Water/
Wastewater
Wastewater
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
| TYPES | 25 | (2,500 psi) | 25H | (5,000 psi) | ||
| INSTRUMENT CONNECTION SIZES | 02 | 1/4″ NPT | 04 | 1/2″ NPT | ||
| UPPER HOUSING MATERIALS | M | Monel 400 | P | Carpenter 20 | S | 316 Stainless steel |
| DIAPHRAGM MATERIALS | H | Hastelloy C-276 | P | Carpenter 20 * | ||
| M | Monel 400 * | S | 316 Stainless steel | |||
| PROCESS CONNECTION SIZES | 02 | 1/4″ NPT | 04 | 1/2″ NPT | ||
| LOWER HOUSING MATERIALS | H | Hastelloy C-276 | P | Carpenter 20 | ||
| M | Monel 400 | S | 316 Stainless steel | |||
| FLUSHING CONNECTIONS | 1F | 1/8″ NPT | 2F | 1/4″ NPT |
* When selecting a Monel or Carpenter 20 Diaphragm, the upper and lower housing must be the same material.
Description
Noshok 25-02S-S-02S Type 25 Diaphragm Seal
Welded Diaphragm Seal, Standard Pressure, 1/4″ NPT Instrument Conn, 316 Stainless Steel, 316 Stainless Steel Diaphragm, 1/4″ NPT Process Conn, 316 Stainless Steel
Type 25/25H Standard & Elevated Pressure, Non-Replaceable Diaphragm Seals
Application Brochures
Water/
Wastewater
Wastewater
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
| TYPES | 25 | (2,500 psi) | 25H | (5,000 psi) | ||
| INSTRUMENT CONNECTION SIZES | 02 | 1/4″ NPT | 04 | 1/2″ NPT | ||
| UPPER HOUSING MATERIALS | M | Monel 400 | P | Carpenter 20 | S | 316 Stainless steel |
| DIAPHRAGM MATERIALS | H | Hastelloy C-276 | P | Carpenter 20 * | ||
| M | Monel 400 * | S | 316 Stainless steel | |||
| PROCESS CONNECTION SIZES | 02 | 1/4″ NPT | 04 | 1/2″ NPT | ||
| LOWER HOUSING MATERIALS | H | Hastelloy C-276 | P | Carpenter 20 | ||
| M | Monel 400 | S | 316 Stainless steel | |||
| FLUSHING CONNECTIONS | 1F | 1/8″ NPT | 2F | 1/4″ NPT |
* When selecting a Monel or Carpenter 20 Diaphragm, the upper and lower housing must be the same material.

