-30%
NOSHOK 3010-MMS-P1 3 Valve Manifold, Hard Seat, Flange x Flange, 316 SS, PTFE Packing
NOSHOK List price: Original price was: $558.37.$399.99Current price is: $399.99.
NOSHOK 5030-FFS-FP-P1 5-Valve Natural Gas Manifold Valves, Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS, Flare Pattern, PTFE Packing
NOSHOK List price: Original price was: $613.64.$441.20Current price is: $441.20.
Noshok 3510-MFS Soft Seat, Flange x 1/2 NPT Female, 316 SS 3 Valve Manifold
Date modified: Apr 17, 2023
Online Prices
NOSHOK List price: Original price was: $570.36.$399.39Current price is: $399.39.
Noshok 3510-MFS Soft Seat, Flange x 1/2 NPT Female, 316 SS 3 Valve Manifold
- Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement
- Available in block, single flange, or double flange connection for remote or direct installation
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 3 | 3-valve | ||||
| SEAT | 5 | Soft seat, 0.375″ orifice | ||||
| PROCESS TYPE | 1 | Differential pressure | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic | HL5 | 1-3/4″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL8) and equalizing “T” handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 3510-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
Description
Noshok 3510-MFS Soft Seat, Flange x 1/2 NPT Female, 316 SS 3 Valve Manifold
- Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement
- Available in block, single flange, or double flange connection for remote or direct installation
- 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- Soft seat design has 6,000 psi pressure rating @ 200 °F
- Features a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
- Blow-out proof stem provides a secondary stem seal in the full open position
- FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling
- All stems are 316 Stainless Steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
- Vinyl dust caps for bonnets and stems
- Non-rotating stem tip standard on isolation valves
ORDERING INFORMATION
| SERIES | 3 | 3-valve | ||||
| SEAT | 5 | Soft seat, 0.375″ orifice | ||||
| PROCESS TYPE | 1 | Differential pressure | ||||
| CONNECTION | 0 | 1/2″ NPT standard or flange | ||||
| VALVE TYPES | MFC | Flange-Female, Steel | MFS | Flange-Female, Stainless Steel | MMC | Flange-Flange, Steel |
| FFC | Female-Female, Steel | FFS | Female-Female, Stainless Steel | MMS | Flange-Flange, Stainless Steel |
To meet all of your specific application requirements, the following additional options are available for these manifold valves. To order all or any of these options, simply add them to the part number as follows:
ORDERING INFORMATION – Additional Options
| SOFT SEATS | PK1 | PEEK | KF1 | PCTFE | ||||
| O-RINGS* | EM1 | EPDM | KZ1 | FFKM (Perfluoroelastomer) | NB1 | NBR | ||
| HANDLES | HL3 | 1″ Round knurled | HL4 | 1-3/8″ Phenolic | HL5 | 1-3/4″ Phenolic |
* Other o-ring materials available on request.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL8) and equalizing “T” handles (HL2).
The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle on the 3510-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
