NOSHOK 502-MFS 1/4 NPT, Male x Female, 316 SS, Soft Seat Needle Valve

Noshok 502-MFS 1/4 NPT, Male x Female, 316 SS, Soft Seat Needle Valve

• Needle Valve, Soft Seat, 1/4 NPT Male – 1/4 NPT Female, 316 SS, 0.187″ Orifice

500 Series Standard, Soft Seat Needle Valves

• 100% helium leak tested to 1 x 10^-4 ml/s for guaranteed performance
  and reliability
• 6,000 psi pressure rating @ 200 °F
• Replaceable Delrin^® seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning
• Blow-out proof stem provides a secondary stem seal in the full open position
• FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional (certain NPT sizes only)
• All stems are 316 stainless steel
• All stem threads are rolled for strength and ease of operation
• One-piece bonnet with a metal-to-metal seal to the valve body below the
  bonnet threads
• Slotted spring pin to prevent accidental loosening
• Vinyl dust cap for bonnet and stem (non-packing)

  

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.

NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 504-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

†  For 1/4″, 3/8″ and 1/2″ NPT only.
*  Other o-ring materials available on request.
** For 3/4″ NPT to 1-1/2″ NPT only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are “T” handles (HL2).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 504-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.