Noshok 25-510-1500-psi-PMC 1/4 NPT Back Conn 2.5 Stainless Steel Gauge, Glycerin Fill, Steel Panel Mount Clamp NOSHOK List price: Original price was: $156.62.Current price is: $116.52.
Back to products
NOSHOK 5132-MFC-FP-PKI FLARE PATTEREN -PEEK Soft Seat, Flange x 1/4 NPT Female, Steel 5-Valve Natural Gas Manifold Valve NOSHOK List price: Original price was: $402.06.Current price is: $299.50.

NOSHOK 5132-FFS-PK1-P1 PEEK Soft Seat PACKING ADDER, 1/4 NPT Female x 1/4 NPT Female, 316 SS 5 Natural Gas Manifold Valve,

Part Number: 5132-FFS-PK1-P1
Online Prices

NOSHOK List price: Original price was: $634.31.Current price is: $427.40.

Warranty: 3 YR

NOSHOK 5132-FFS-PK1-P1 PEEK Soft Seat PACKING ADDER, 1/4 NPT Female x 1/4 NPT Female, 316 SS 5 Natural Gas Manifold Valve,

  • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
  • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
  • Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Available in block, single flange, or double flange connection for remote or direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
  • 5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve (U.S. Patent 7,758,014)

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

 

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Graphite **        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

Description

NOSHOK 5132-FFS-PK1-P1 PEEK Soft Seat PACKING ADDER, 1/4 NPT Female x 1/4 NPT Female, 316 SS 5 Natural Gas Manifold Valve,

  • Designed for use with differential pressure transmitters incorporating two isolation valves, two equalizing valves and a vent valve required in natural gas applications
  • Flare Pattern™ valve configuration provides maximum clearance for fingers during operation
  • Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
  • Available in block, single flange, or double flange connection for remote or direct installation
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • 5030 Series hard seat valves have 10,000 psi pressure rating @ 200 °F
  • 5130 Series soft seat/tip valves have 6,000 psi pressure rating @ 200 °F
  • 5130 Series valves also feature a replaceable Acetal seat, and straight through porting for bidirectional, high capacity flow and easy roddable cleaning on the block valves
  • Blow-out proof stem provides a secondary stem seal in the full open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Graphite packing optional
  • All stems are 316 Stainless Steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust caps for bonnets and stems (non-packing)
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve (U.S. Patent 7,758,014)

ORDERING INFORMATION

SERIES 5 5-valve        
SEATS 0 Hard seat 1 Soft seat/tip    
PROCESS TYPE 3 Natural gas flow        
CONNECTION 0 1/2″ NPT or flange        
VALVE TYPES MFC Flange-Female, Steel MFS Flange-Female, Stainless Steel MMC Flange-Flange, Steel
FFC Female-Female, Steel FFS Female-Female, Stainless Steel MMS Flange-Flange, Stainless Steel

 

ORDERING INFORMATION – Additional Options

BODY CONFIGURATION FP Flare Pattern™            
SOFT SEATS PK1 PEEK KF1 PCTFE        
PACKINGS P1 PTFE P2 Graphite **        
STEM TIPS T1 Non-rotating (316 stainless)** T4 PEEK*** T7 Ball (ceramic)** T10 Regulating Acetal***
T2 Acetal*** T5 Ball (440C stainless)** T8 Ball (Monel)** T11 Regulating PTCFE***
T3 PTCFE*** T6 Ball (carbide)** T9 Non-rotating regulating (316 Stainless)** T12 Regulating PEEK***
O-RINGS* EM1 EPDM KZ1 FFKM (Perfluoroelastomer) NB1 NBR    
HANDLES HL1 1-13/16″ Mini “T” HL4 1-3/8″ Phenolic        
HL3 1″ Round knurled HL5 1-3/4″ Phenolic        

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.
* Other o-ring materials available on request.
** For 5030 only.
*** For 5130 only.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are isolation “T” handles (HL2) and equalizing & vent 1-3/8″ mini “T” handles (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, handles on the 5130-MFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.